Research Article
BibTex RIS Cite

Year 2019, Volume: 23 Issue: 5, 902 - 907, 01.10.2019

Yahya Taşgın Engin Şahin

https://doi.org/10.16984/saufenbilder.550816

Abstract

References

  • Addington, Michelle and Daniel L. Schodek. 2005. Smart Materials and Technologies in Architecture. Retrieved April 25, 2017 (https://bintian. files.wordpress. com/2013/01/smart-materials-new-technologies-for-the architecture-design professions. pdf).
  • Balikoğlu, Fatih, Akın Ataş, and Nurettin Arslan. 2012. “Yat ve Tekne İmalatında Vakum İnfüzyon Ile Kompozit Üretim Yönteminin Uygulanması.” Pp. 480–95 in 3. Ulusal Tasarım İmalat ve Analiz Kongresi.
  • Gu, Yizhuo, Xuelin Tan, Zhongjia Yang, Min li, and Zuoguang Zhang. 2014. “Hot Compaction and Mechanical Properties of Ramie Fabric/epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding.” Materials and Design 56:852–61. Retrieved (http://dx.doi.org/10.1016/j.matdes.2013.11.077).
  • İsmail, Durgun, Vatansever Onur, Ertan Rukiye, and Yavuz Nurettin. 2013. “Otomotiv Sektöründe Kullanılan Kompozit Parça İmalat Yöntemlerinin Deneysel Olarak Karşılaştırlması.” in II. Ulusal Ege Kompozit Malzemeler Sempozyumu.
  • İsmail, Durgun, Vatansever Onur, Ertan Rukiye, and Yavuz Nurettin. 2014. “Polimer Esaslı Elyaf Takviyeli Kompozit Malzemelerde Üretim Tekniğinin Mekanik Özellikler Üzerindeki Etkisi.” in 7. Otomotiv Teknolojileri Kongresi. BURSA.
  • İsmail Durgun. 2013. “Vakum İnfüzyon Yöntemi Ile Karbon Fiber Motor Kaput Üretimi.” in II. Ulusal Ege Kompozit Malzemeler Sempozyumu.
  • Sevkat, Ercan and Malek Brahimi. 2011. “The Bearing Strength of Pin Loaded Woven Composites Manufactured by Vacuum Assisted Resin Transfer Moulding and Hand Lay-up Techniques.” Procedia Engineering 10:153–58. Retrieved (http://dx.doi.org/10.1016/j.proeng.2011.04.028).
  • URL-1. 2017. “http://www.bilgiustam. com/kompozit-Malzemeler-Hakkında -Hersey/.” Retrieved April 25, 2017 (http://www.bilgiustam.com/?s=kompozit+malzemeler).
  • URL-2. 2017. “http://www.kompozit. net/pinfo.asp?pid=287&diger=tumu.” Retrieved April 25, 2017 (http://www.kompozit.net/).
  • Wang, Changchun, Guangquan Yue, Guanghui Bai, Lijian Pan, and Boming Zhang. 2016. “Compaction Behavior and Permeability Property Tests of Preforms in Vacuum-Assisted Resin Transfer Molding Using a Combined Device.” Measurement: Journal of the International Measurement Confederation 90:357–64. Retrieved (http://dx.doi.org/10.1016/j.measurement.2016.04.058).
  • Zhang, Kaomin, Yizhuo Gu, Min li, and Zuoguang Zhang. 2014. “Effect of Rapid Curing Process on the Properties of Carbon Fiber/epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding.” Materials and Design 54:624–31. Retrieved (http://dx.doi.org/10.1016/j.matdes.2013.08.065).

Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites with VARTM Method

Year 2019, Volume: 23 Issue: 5, 902 - 907, 01.10.2019

Yahya Taşgın Engin Şahin

https://doi.org/10.16984/saufenbilder.550816

Abstract

In this study, laminated composite materials are
produced by Vacuum Assisted Resin Transfer Molding (VARTM) Method. Three
different reinforcement materials (carbon, kevlar and aramid) are used in the
production phase. Tensile test is applied to the samples after the production
and in the light of SEM images, fractured surfaces of the samples and their
results are evaluated.



It is
obvious that the mechanical properties of carbon fiber reinforced samples yield
better results.

Keywords

Kevlar Carbon Aramid Reinforcement VARTM Method Composite

References

  • Addington, Michelle and Daniel L. Schodek. 2005. Smart Materials and Technologies in Architecture. Retrieved April 25, 2017 (https://bintian. files.wordpress. com/2013/01/smart-materials-new-technologies-for-the architecture-design professions. pdf).
  • Balikoğlu, Fatih, Akın Ataş, and Nurettin Arslan. 2012. “Yat ve Tekne İmalatında Vakum İnfüzyon Ile Kompozit Üretim Yönteminin Uygulanması.” Pp. 480–95 in 3. Ulusal Tasarım İmalat ve Analiz Kongresi.
  • Gu, Yizhuo, Xuelin Tan, Zhongjia Yang, Min li, and Zuoguang Zhang. 2014. “Hot Compaction and Mechanical Properties of Ramie Fabric/epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding.” Materials and Design 56:852–61. Retrieved (http://dx.doi.org/10.1016/j.matdes.2013.11.077).
  • İsmail, Durgun, Vatansever Onur, Ertan Rukiye, and Yavuz Nurettin. 2013. “Otomotiv Sektöründe Kullanılan Kompozit Parça İmalat Yöntemlerinin Deneysel Olarak Karşılaştırlması.” in II. Ulusal Ege Kompozit Malzemeler Sempozyumu.
  • İsmail, Durgun, Vatansever Onur, Ertan Rukiye, and Yavuz Nurettin. 2014. “Polimer Esaslı Elyaf Takviyeli Kompozit Malzemelerde Üretim Tekniğinin Mekanik Özellikler Üzerindeki Etkisi.” in 7. Otomotiv Teknolojileri Kongresi. BURSA.
  • İsmail Durgun. 2013. “Vakum İnfüzyon Yöntemi Ile Karbon Fiber Motor Kaput Üretimi.” in II. Ulusal Ege Kompozit Malzemeler Sempozyumu.
  • Sevkat, Ercan and Malek Brahimi. 2011. “The Bearing Strength of Pin Loaded Woven Composites Manufactured by Vacuum Assisted Resin Transfer Moulding and Hand Lay-up Techniques.” Procedia Engineering 10:153–58. Retrieved (http://dx.doi.org/10.1016/j.proeng.2011.04.028).
  • URL-1. 2017. “http://www.bilgiustam. com/kompozit-Malzemeler-Hakkında -Hersey/.” Retrieved April 25, 2017 (http://www.bilgiustam.com/?s=kompozit+malzemeler).
  • URL-2. 2017. “http://www.kompozit. net/pinfo.asp?pid=287&diger=tumu.” Retrieved April 25, 2017 (http://www.kompozit.net/).
  • Wang, Changchun, Guangquan Yue, Guanghui Bai, Lijian Pan, and Boming Zhang. 2016. “Compaction Behavior and Permeability Property Tests of Preforms in Vacuum-Assisted Resin Transfer Molding Using a Combined Device.” Measurement: Journal of the International Measurement Confederation 90:357–64. Retrieved (http://dx.doi.org/10.1016/j.measurement.2016.04.058).
  • Zhang, Kaomin, Yizhuo Gu, Min li, and Zuoguang Zhang. 2014. “Effect of Rapid Curing Process on the Properties of Carbon Fiber/epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding.” Materials and Design 54:624–31. Retrieved (http://dx.doi.org/10.1016/j.matdes.2013.08.065).
There are 11 citations in total.

Details

Primary Language English
Subjects Material Production Technologies
Journal Section Research Articles
Authors

Yahya Taşgın 0000-0002-0902-336X

Engin Şahin This is me 0000-0002-6238-0817

Publication Date October 1, 2019
Submission Date April 8, 2019
Acceptance Date May 2, 2019
Published in Issue Year 2019 Volume: 23 Issue: 5

Cite

APA Taşgın, Y., & Şahin, E. (2019). Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites with VARTM Method. Sakarya University Journal of Science, 23(5), 902-907. https://doi.org/10.16984/saufenbilder.550816
AMA Taşgın Y, Şahin E. Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites with VARTM Method. SAUJS. October 2019;23(5):902-907. doi:10.16984/saufenbilder.550816
Chicago Taşgın, Yahya, and Engin Şahin. “Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites With VARTM Method”. Sakarya University Journal of Science 23, no. 5 (October 2019): 902-7. https://doi.org/10.16984/saufenbilder.550816.
EndNote Taşgın Y, Şahin E (October 1, 2019) Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites with VARTM Method. Sakarya University Journal of Science 23 5 902–907.
IEEE Y. Taşgın and E. Şahin, “Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites with VARTM Method”, SAUJS, vol. 23, no. 5, pp. 902–907, 2019, doi: 10.16984/saufenbilder.550816.
ISNAD Taşgın, Yahya - Şahin, Engin. “Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites With VARTM Method”. Sakarya University Journal of Science 23/5 (October 2019), 902-907. https://doi.org/10.16984/saufenbilder.550816.
JAMA Taşgın Y, Şahin E. Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites with VARTM Method. SAUJS. 2019;23:902–907.
MLA Taşgın, Yahya and Engin Şahin. “Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites With VARTM Method”. Sakarya University Journal of Science, vol. 23, no. 5, 2019, pp. 902-7, doi:10.16984/saufenbilder.550816.
Vancouver Taşgın Y, Şahin E. Production and Characterization of Carbon-Kevlar-Aramid Reinforced Layer Composites with VARTM Method. SAUJS. 2019;23(5):902-7.
 Download Cover Image

30930  This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.