Araştırma Makalesi
BibTex RIS Kaynak Göster

Alternatif Atıkların Kullanımı ile Üretilen Polipropilen Lif Takviyeli Kompozitlerin Mekanik Özelliklerinin Araştırılması

Yıl 2021, Cilt: 24 Sayı: 3, 1171 - 1180, 01.09.2021
https://doi.org/10.2339/politeknik.777832

Öz

Madencilik faaliyetleri nedeniyle oluşan atıkların bertaraftı veya depolanması konusunda bugüne kadar çeşitli çalışmalar yapılmıştır. Gelişen teknoloji ile betonda agrega yerine alternatif ürünler kullanılmaya başlanmış ve agrega yerine kullanılan alternatif ürünlere fiber ilavesinin etkisi incelenmiştir. Yapılan çalışmaların en yaygınları kiriş numune üzerine yapılan eğilme dayanım testleridir. Bu çalışmada betonda kullanılan agrega yerine eşit hacimce madencilik işlemleri sonucu oluşan katı atıklar (bakır madencilik atığı, mermer atığı) ve uçucu kül kullanılmıştır. Bu katı atıkların kullanılması ile oluşturulan karışıma 4-6 kg/m3 polipropilen lif katılarak 40×40×160 mm boyutunda kiriş numuneleri dökülmüştür. Kiriş numuneler üzerinde; liflerin, ultrases geçiş hızı, eğilme ve basınç dayanımlarına etkisi incelenmiştir. Yapılan çalışmalar sonucunda liflerin basınç ve eğilme dayanımına olumlu etki yaparken, betonun su emme oranlarını ve yoğunluklarını etkilemediği belirlenmiştir. Son olarak ultrases geçiş hızının lif miktarı arttıkça azaldığı görülmüştür.

Kaynakça

  • [1] Arslan A., “Mixed mode fracture performance of fiber reinforced concrete under impact loading”, Materials and Structures, 28: 473- 478,(1995).
  • [2] Arslan A. and Aydın A.C., “General properties of fiber reinforced concrete under impact impact ”, Steel Wire Reinforced Concrete Symposium, Sabanci Center, İstanbul, (1999).
  • [3] European Commission, Reference document on best available techniques for management of tailings and waste-rock in mining activities, 427- 435, (2009).
  • [4] Çullu M., Subaşı, S. and Bolat H., “Concrete cancer-alkali silica reaction”, e-Journal of New World Sciences Academy Engineering Sciences, 1A0103, 5: (3), 526-540, (2010).
  • [5] Akça K.R., Çakır Ö. and İpek M., Properties of polypropylene fiber reinforced concrete using recycled aggregates, Construction and Building Materials, 98: 620-630, (2015).
  • [6] Kozak M., “Research of concretes with steel fiber and it’s usage”, SDU Journal of Technical Sciences, 3:5, 26-35, (2013).
  • [7] Külekçi G., “Effect of different synthetic fiber using shotcrete on ultrasonic pulse velocity,” 4. UYAK ,İstanbul, (2018).
  • [8] Külekçi G., Kesimal A. and Yilmaz T., “Investigation of shotcrete support in Gümüşhane mastra gold mine,” 7. National Aggregate Symposium, (2015).
  • [9] Külekçi G. and Eker H., “Investigation of the usability of construction wastes in composite fill” Omer Halis Demir University Journal of Engineering Sciences, 7(1): 475-482, (2018).
  • [10] Xenidis A., Mylona E. and Paspaliari, I., “Potential use of lignite fly ash for the control of acid generation from sulphidic wastes”, Waste Management, 22: 631641, (2002).
  • [11] Archibald J.F., Lausch P. and He Z.X., “Quality control problems associated with backfill use in mines”, The Canadian Mining and Metallurgical Bulletin, 86: 972, 53-57, (1993).
  • [12] Benzaazoua M., Belem T. and Bussiere B., “Chemical factors that influence the performance of mine sulphidic composite backfill”, Cement and Concrete Research, 32: 7, 1133-1144, (2002).
  • [13] Erçikdi B., Külekçi G. and Yilmaz T., “Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented composite backfill of sulphide-rich tailings” Construction and Building Materials, 93: 573-583, (2015).
  • [14] Erçıkdı B. and Yılmaz T.,” Strength and microstructure properties of cemented composite backfill; effect of class-c fly ash”, DEÜ FMD, 21 (61): 15-23, (2019).
  • [15] Külekçi G. “Investigation of the utilization areas of construction and demolition wastes in the black sea region instead of aggregate and their areas of usage in the mining industry”, KTÜ, Institute of science, PHD dissertation, Trabzon, (2018).
  • [16] Dehghanpour H., Yilmaz K. and Ipek M., “Evaluation of recycled nano carbon black and waste erosion wires in electrically conductive concretes”, Construction and Building Materials, 221:109-121, (2019).
  • [17] Ipek M. and Aksu M., “The effect of different types of fiber on flexure strength and fracture toughness in SIFCON”, Construction and Building Materials, 214: 207-218, (2019).
  • [18] İpek M., Canbay M. and Yılmaz K., “The effect of steel and polypropylene fibers using combination and lean on mechanical and physical properties of SIFCON”, SAÜ 19 (1): 41-52, (2015).

The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes

Yıl 2021, Cilt: 24 Sayı: 3, 1171 - 1180, 01.09.2021
https://doi.org/10.2339/politeknik.777832

Öz

Various studies on the disposal or storage of the wastes generated due to mining activities have been carried out until today. With the developing technology, the use of alternative products instead of aggregates in Composite and the effect of fiber addition were investigated. The most common of these studies is the bending strength tests on the beam sample. In this study, solid wastes generated by mining operations were used instead of aggregate used in Composite. Beam samples were poured with the dimensions of 40×40×160 mm by adding 4-6 kg/m3 polypropylene fiber to the mixture obtained by using these solid wastes; then, its effects on ultrasonic pulse velocity test, tensile test, and compressive strength tests were conducted. According to the results of these tests, it was found that the fibers had a positive effect on compressive strength and bending strength. Also, it was found that water absorption rates and densities did not have an effect, while the ultrasonic pulse velocity decreased with increasing fiber content.

Kaynakça

  • [1] Arslan A., “Mixed mode fracture performance of fiber reinforced concrete under impact loading”, Materials and Structures, 28: 473- 478,(1995).
  • [2] Arslan A. and Aydın A.C., “General properties of fiber reinforced concrete under impact impact ”, Steel Wire Reinforced Concrete Symposium, Sabanci Center, İstanbul, (1999).
  • [3] European Commission, Reference document on best available techniques for management of tailings and waste-rock in mining activities, 427- 435, (2009).
  • [4] Çullu M., Subaşı, S. and Bolat H., “Concrete cancer-alkali silica reaction”, e-Journal of New World Sciences Academy Engineering Sciences, 1A0103, 5: (3), 526-540, (2010).
  • [5] Akça K.R., Çakır Ö. and İpek M., Properties of polypropylene fiber reinforced concrete using recycled aggregates, Construction and Building Materials, 98: 620-630, (2015).
  • [6] Kozak M., “Research of concretes with steel fiber and it’s usage”, SDU Journal of Technical Sciences, 3:5, 26-35, (2013).
  • [7] Külekçi G., “Effect of different synthetic fiber using shotcrete on ultrasonic pulse velocity,” 4. UYAK ,İstanbul, (2018).
  • [8] Külekçi G., Kesimal A. and Yilmaz T., “Investigation of shotcrete support in Gümüşhane mastra gold mine,” 7. National Aggregate Symposium, (2015).
  • [9] Külekçi G. and Eker H., “Investigation of the usability of construction wastes in composite fill” Omer Halis Demir University Journal of Engineering Sciences, 7(1): 475-482, (2018).
  • [10] Xenidis A., Mylona E. and Paspaliari, I., “Potential use of lignite fly ash for the control of acid generation from sulphidic wastes”, Waste Management, 22: 631641, (2002).
  • [11] Archibald J.F., Lausch P. and He Z.X., “Quality control problems associated with backfill use in mines”, The Canadian Mining and Metallurgical Bulletin, 86: 972, 53-57, (1993).
  • [12] Benzaazoua M., Belem T. and Bussiere B., “Chemical factors that influence the performance of mine sulphidic composite backfill”, Cement and Concrete Research, 32: 7, 1133-1144, (2002).
  • [13] Erçikdi B., Külekçi G. and Yilmaz T., “Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented composite backfill of sulphide-rich tailings” Construction and Building Materials, 93: 573-583, (2015).
  • [14] Erçıkdı B. and Yılmaz T.,” Strength and microstructure properties of cemented composite backfill; effect of class-c fly ash”, DEÜ FMD, 21 (61): 15-23, (2019).
  • [15] Külekçi G. “Investigation of the utilization areas of construction and demolition wastes in the black sea region instead of aggregate and their areas of usage in the mining industry”, KTÜ, Institute of science, PHD dissertation, Trabzon, (2018).
  • [16] Dehghanpour H., Yilmaz K. and Ipek M., “Evaluation of recycled nano carbon black and waste erosion wires in electrically conductive concretes”, Construction and Building Materials, 221:109-121, (2019).
  • [17] Ipek M. and Aksu M., “The effect of different types of fiber on flexure strength and fracture toughness in SIFCON”, Construction and Building Materials, 214: 207-218, (2019).
  • [18] İpek M., Canbay M. and Yılmaz K., “The effect of steel and polypropylene fibers using combination and lean on mechanical and physical properties of SIFCON”, SAÜ 19 (1): 41-52, (2015).
Toplam 18 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Gökhan Külekçi 0000-0002-2971-4045

Mustafa Çullu 0000-0002-0454-7949

Yayımlanma Tarihi 1 Eylül 2021
Gönderilme Tarihi 7 Ağustos 2020
Yayımlandığı Sayı Yıl 2021 Cilt: 24 Sayı: 3

Kaynak Göster

APA Külekçi, G., & Çullu, M. (2021). The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes. Politeknik Dergisi, 24(3), 1171-1180. https://doi.org/10.2339/politeknik.777832
AMA Külekçi G, Çullu M. The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes. Politeknik Dergisi. Eylül 2021;24(3):1171-1180. doi:10.2339/politeknik.777832
Chicago Külekçi, Gökhan, ve Mustafa Çullu. “The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes”. Politeknik Dergisi 24, sy. 3 (Eylül 2021): 1171-80. https://doi.org/10.2339/politeknik.777832.
EndNote Külekçi G, Çullu M (01 Eylül 2021) The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes. Politeknik Dergisi 24 3 1171–1180.
IEEE G. Külekçi ve M. Çullu, “The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes”, Politeknik Dergisi, c. 24, sy. 3, ss. 1171–1180, 2021, doi: 10.2339/politeknik.777832.
ISNAD Külekçi, Gökhan - Çullu, Mustafa. “The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes”. Politeknik Dergisi 24/3 (Eylül 2021), 1171-1180. https://doi.org/10.2339/politeknik.777832.
JAMA Külekçi G, Çullu M. The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes. Politeknik Dergisi. 2021;24:1171–1180.
MLA Külekçi, Gökhan ve Mustafa Çullu. “The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes”. Politeknik Dergisi, c. 24, sy. 3, 2021, ss. 1171-80, doi:10.2339/politeknik.777832.
Vancouver Külekçi G, Çullu M. The Investigation of Mechanical Properties of Polypropylene Fiber-Reinforced Composites Produced With the Use of Alternative Wastes. Politeknik Dergisi. 2021;24(3):1171-80.
 
TARANDIĞIMIZ DİZİNLER (ABSTRACTING / INDEXING)
181341319013191 13189 13187 13188 18016 

download Bu eser Creative Commons Atıf-AynıLisanslaPaylaş 4.0 Uluslararası ile lisanslanmıştır.