Sanitary landfill is the most preferred municipal solid waste disposal method. The production of highly polluted leachate is a major disadvantage of sanitary landfills. In this study, optimization of struvite precipitation to remove ammonium from landfill leachate was conducted by using Response Surface Methodology (RSM) and Central Composite Design (CCD). Optimum struvite precipitation conditions were determined based upon 11 runs performed in CCD. A second-order polynomial functional model was fitted well to the results. The statistical analysis showed that two independent variables which are molar rates of Mg/N and N/P had significant effects on the ammonium removal efficiency. Maximum ammonium removal efficiency was 99.8% at a molar rate of 1.20 for Mg/N and 1.27 for N/P for a constant 9.2 pH value. The obtained results revealed that struvite used as pretreatment in anaerobic process can be modelled by using RSM. And also, RSM can be used to optimize required ammonium removal efficiency for lower Mg/N and N/P molar ratio which affects the performance of pretreatment method that designed for an anaerobic process having 300:5:1 ratio for COD/N/P.
Central Composite Design (CCD) Landfill Leachate MAP Response Surface Methodology (RSM) Struvite
Evsel katı atıkların
bertarafında düzenli depolama yöntemi sıklıkla tercih edilmektedir. Çok kirli
sızıntı suyu oluşumu, düzenli depolama tesislerinin en önemli dezavantajıdır.
Bu çalışmada, Cevap Yüzey Yöntemi ve Merkezi Kompozit Tasarımı kullanılarak
sızıntı suyundan amonyum giderimine yönelik strüvit çöktürme optimizasyonu
yapılmıştır. Optimum strüvit çöktürme şartlarının belirlenmesi için 11 adet
deneysel çalışma yapılmıştır. Sonuçlar ikinci dereceden polinom fonksiyonel
model ile iyi uyum göstermiştir. İstatistiki analizler, Mg/N ve N/P molar oranı
bağımsız değişkenlerinin amonyum giderim verimi üzerine önemli etkisinin
olduğunu ortaya koymuştur. En yüksek amonyum giderim verimine %99,8 olarak; 9,2
sabit pH değerinde, Mg/N için 1,2 ve N/P için 1,27 molar oranlarında
ulaşılmıştır. Elde edilen sonuçlar, anaerobik proseste ön arıtım olarak
kullanılan strüvitin Cevap Yüzey Yöntemi kullanılarak modellenebildiğini ortaya
koymuştur. Ayrıca Cevap Yüzey Yöntemi; KOİ/N/P için 300:5:1 oranına sahip bir
anaerobik proses için tasarlanmış olan ön arıtım performansını etkileyen daha
düşük Mg/N ve N/P molar oranı için gerekli amonyum giderme verimliliğini
optimize etmek için kullanılabilir.
Merkezi Kompozit Tasarım (MKT) Düzenli depolama Sızıntı suyu MAP Cevap Yüzey Yöntemi (CYY) Strüvit
Primary Language | English |
---|---|
Subjects | Engineering |
Journal Section | Research Articles |
Authors | |
Publication Date | April 19, 2018 |
Submission Date | December 31, 2017 |
Acceptance Date | February 19, 2018 |
Published in Issue | Year 2018 Volume: 23 Issue: 1 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.