Research Article
BibTex RIS Cite

INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075

Year 2020, Volume: 9 Issue: 1, 528 - 537, 30.01.2020

Süleyman Kılıç İlyas Kacar Mevlut Şahin Fahrettin Öztürk Oğuz Erdem

https://doi.org/10.28948/ngumuh.681273

Abstract

In this study, effect of quenching temperature on mechanical properties of Aluminum Alloy 7075 (AA7075) are investigated. Several quenching environment is tested oil (20W50), icy water (2 oC), water (25 oC), and hot water (85 oC). Mechanical properties of the materials are measured. X-ray diffraction analyses are also performed for each condition. Results indicated that properties at hot water quenching and oil quenching are found to be similar. It is concluded that oil quenching does not have significant effect on mechanical properties.

Keywords

AA7075 Quenching temperature Microstructure Mechanical properties Aging

Project Number

MMF.A3.17.001

References

  • [1] J. T. Staley, "History of wrought–aluminium–alloy development," in Aluminium Alloys: Contemporary Research and Applications, Treaties on Materials Science and Technology, vol. 31, R. D. D. A. K. Vasudevan, Ed. Pennsylvania: Alcoa Technical Center, 2012, pp. 3-31.
  • [2] A. K. Vasudevan and R. D. Doherty, Aluminum Alloys-Contemporary Research and Applications: Contemporary Research and Applications. England: Elsevier, 1989.
  • [3] C. Mondal and A. K. Mukhopadhyay, "On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy," Materials Science and Engineering: A, vol. 391, no. 1, pp. 367-376, 2005.
  • [4] A. Lalpour, A. Soltanipour, and K. Farmanesh, "Effect of Friction Stir Processing on the Microstructure and Superplasticity of 7075 Aluminum Alloy," in 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM15) Tehran, Iran, 2015, pp. 1-6.
  • [5] X.-G. Fan, D.-M. Jiang, Q.-C. Meng, B.-Y. Zhang, and W. Tao, "Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment," Transactions of Nonferrous Metals Society of China, vol. 16, no. 3, pp. 577-581, 2006.
  • [6] S. T. Lim, I. S. Eun, and S. W. Nam, "Control of equilibrium phases (M, T, S) in the modified aluminum alloy 7175 for thick forging applications," Materials Transactions, vol. 44, no. 1, pp. 181-187, 2003.
  • [7] B. Binesh and A. K. Mehrdad, "Phase evolution and mechanical behavior of the semi-solid SIMA processed 7075 aluminum alloy," Metals, vol. 6, no. 3, p. 42, 2016.
  • [8] D. Ozyürek, R. Yılmaz, and E. Kibar, "The effects of retrogression parameters in RRA treatment on tensile strength of 7075 aluminium alloys," Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 27, no. 1, pp. 193-203, 2012.
  • [9] R. Clark et al., "On the correlation of mechanical and physical properties of 7075-T6 Al alloy," Engineering Failure Analysis, vol. 12, no. 4, pp. 520-526, 2005/08/01/ 2005.
  • [10] D. Dumont, A. Deschamps, and Y. Brechet, "On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy," Materials Science and Engineering: A, vol. 356, no. 1, pp. 326-336, 2003/09/15/ 2003.
  • [11] A. T. Güner, Effect of quenching temperature on mechanical properties of semi-solid forming aluminum alloys (Institute of Science and Technology). Pamukkale University, 2013.
  • [12] B. Oğuz, Demir dışı metallerin kaynağı (OERLIKON yayını). 1990, pp. 1-23.
  • [13] C. Demir, E. B. Mentese, and M. A. Togay, "Alüminyum ısıl işleminde su verme uygulamaları ve kalıntı gerilme etkisi," Componenta doktas, 2017.
  • [14] I. Polmear, D. John, J.-F. Nie, and M. Qian, Light alloys: metallurgy of the light metals. Butterworth-Heinemann, 2017.
  • [15] S. Kilic and F. Ozturk, "Evaluation of Mathematical Models Performances in XRD Analysis for Determination of Volumetric Ratios of Phases," in 1st International Mediterranean Science and Engineering Congress (IMSEC), Adana, Turkey, 2016.
  • [16] H. Moumenı, S. Alleg, C. Djebbarı, F. Z. Bentayeb, and J. M. Greneche, "Synthesis and characterisation of nanostructured FeCo alloys," Journal of Materials Science, journal article vol. 39, no. 16, pp. 5441-5443, 2004.
  • [17] S. Mehdaoui et al., "Study of the properties of CuInSe2 materials prepared from nanoparticle powder," Materials Characterization, vol. 60, no. 5, pp. 451-455, 5// 2009.
  • [18] N. Benslim et al., "XRD and TEM characterizations of the mechanically alloyed CuIn0.5Ga0.5Se2 powders," Journal of Alloys and Compounds, vol. 489, no. 2, pp. 437-440, 1/21/ 2010.
  • [19] G. Dini, A. Najafizadeh, S. M. Monir-Vaghefi, and R. Ueji, "Grain size effect on the martensite formation in a high-manganese TWIP steel by the Rietveld method," Journal of Materials Science & Technology, vol. 26, no. 2, pp. 181-186, 2010.
  • [20] A. E. Karpikhin et al., "Structure of hydroxyapatite powders prepared through dicalcium phosphate dihydrate hydrolysis," Inorganic Materials, journal article vol. 52, no. 2, pp. 170-175, 2016.
  • [21] Z. K. Heiba, M. B. Mohamed, and A. M. Wahba, "Effect of Mo substitution on structural and magnetic properties of Zinc ferrite nanoparticles," Journal of Molecular Structure, vol. 1108, pp. 347-351, 3/15/ 2016.
  • [22] http://maud.radiographema.eu/. (2017, January 2017).
  • [23] http://profex.doebelin.org/. (2017, January 2017).
  • [24] https://www.ill.eu/sites/fullprof/. (2017, January 2017).
  • [25] A. Pastor and H. G. Svoboda, "Time-evolution of heat affected zone (HAZ) of friction stir welds of AA7075-T651," Journal of Materials Physics and Chemistry, vol. 1, no. 4, pp. 58-64, 2013.
  • [26] R. H. Oskouei, M. R. Barati, and R. N. Ibrahim, "Surface characterizations of fretting fatigue damage in aluminum alloy 7075-T6 clamped joints: the beneficial role of Ni–P coatings," Materials, vol. 9, no. 3, p. 141, 2016.

Year 2020, Volume: 9 Issue: 1, 528 - 537, 30.01.2020

Süleyman Kılıç İlyas Kacar Mevlut Şahin Fahrettin Öztürk Oğuz Erdem

https://doi.org/10.28948/ngumuh.681273

Abstract

Supporting Institution

Ahi Evran University

Project Number

MMF.A3.17.001

Thanks

This work was supported by Ahi Evran University, Scientific Research Projects Coordination Unit. Project Number:MMF.A3.17.001 . We would like to thank the Scientific Research Coordination Unit for their financial support.

References

  • [1] J. T. Staley, "History of wrought–aluminium–alloy development," in Aluminium Alloys: Contemporary Research and Applications, Treaties on Materials Science and Technology, vol. 31, R. D. D. A. K. Vasudevan, Ed. Pennsylvania: Alcoa Technical Center, 2012, pp. 3-31.
  • [2] A. K. Vasudevan and R. D. Doherty, Aluminum Alloys-Contemporary Research and Applications: Contemporary Research and Applications. England: Elsevier, 1989.
  • [3] C. Mondal and A. K. Mukhopadhyay, "On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy," Materials Science and Engineering: A, vol. 391, no. 1, pp. 367-376, 2005.
  • [4] A. Lalpour, A. Soltanipour, and K. Farmanesh, "Effect of Friction Stir Processing on the Microstructure and Superplasticity of 7075 Aluminum Alloy," in 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM15) Tehran, Iran, 2015, pp. 1-6.
  • [5] X.-G. Fan, D.-M. Jiang, Q.-C. Meng, B.-Y. Zhang, and W. Tao, "Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment," Transactions of Nonferrous Metals Society of China, vol. 16, no. 3, pp. 577-581, 2006.
  • [6] S. T. Lim, I. S. Eun, and S. W. Nam, "Control of equilibrium phases (M, T, S) in the modified aluminum alloy 7175 for thick forging applications," Materials Transactions, vol. 44, no. 1, pp. 181-187, 2003.
  • [7] B. Binesh and A. K. Mehrdad, "Phase evolution and mechanical behavior of the semi-solid SIMA processed 7075 aluminum alloy," Metals, vol. 6, no. 3, p. 42, 2016.
  • [8] D. Ozyürek, R. Yılmaz, and E. Kibar, "The effects of retrogression parameters in RRA treatment on tensile strength of 7075 aluminium alloys," Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 27, no. 1, pp. 193-203, 2012.
  • [9] R. Clark et al., "On the correlation of mechanical and physical properties of 7075-T6 Al alloy," Engineering Failure Analysis, vol. 12, no. 4, pp. 520-526, 2005/08/01/ 2005.
  • [10] D. Dumont, A. Deschamps, and Y. Brechet, "On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy," Materials Science and Engineering: A, vol. 356, no. 1, pp. 326-336, 2003/09/15/ 2003.
  • [11] A. T. Güner, Effect of quenching temperature on mechanical properties of semi-solid forming aluminum alloys (Institute of Science and Technology). Pamukkale University, 2013.
  • [12] B. Oğuz, Demir dışı metallerin kaynağı (OERLIKON yayını). 1990, pp. 1-23.
  • [13] C. Demir, E. B. Mentese, and M. A. Togay, "Alüminyum ısıl işleminde su verme uygulamaları ve kalıntı gerilme etkisi," Componenta doktas, 2017.
  • [14] I. Polmear, D. John, J.-F. Nie, and M. Qian, Light alloys: metallurgy of the light metals. Butterworth-Heinemann, 2017.
  • [15] S. Kilic and F. Ozturk, "Evaluation of Mathematical Models Performances in XRD Analysis for Determination of Volumetric Ratios of Phases," in 1st International Mediterranean Science and Engineering Congress (IMSEC), Adana, Turkey, 2016.
  • [16] H. Moumenı, S. Alleg, C. Djebbarı, F. Z. Bentayeb, and J. M. Greneche, "Synthesis and characterisation of nanostructured FeCo alloys," Journal of Materials Science, journal article vol. 39, no. 16, pp. 5441-5443, 2004.
  • [17] S. Mehdaoui et al., "Study of the properties of CuInSe2 materials prepared from nanoparticle powder," Materials Characterization, vol. 60, no. 5, pp. 451-455, 5// 2009.
  • [18] N. Benslim et al., "XRD and TEM characterizations of the mechanically alloyed CuIn0.5Ga0.5Se2 powders," Journal of Alloys and Compounds, vol. 489, no. 2, pp. 437-440, 1/21/ 2010.
  • [19] G. Dini, A. Najafizadeh, S. M. Monir-Vaghefi, and R. Ueji, "Grain size effect on the martensite formation in a high-manganese TWIP steel by the Rietveld method," Journal of Materials Science & Technology, vol. 26, no. 2, pp. 181-186, 2010.
  • [20] A. E. Karpikhin et al., "Structure of hydroxyapatite powders prepared through dicalcium phosphate dihydrate hydrolysis," Inorganic Materials, journal article vol. 52, no. 2, pp. 170-175, 2016.
  • [21] Z. K. Heiba, M. B. Mohamed, and A. M. Wahba, "Effect of Mo substitution on structural and magnetic properties of Zinc ferrite nanoparticles," Journal of Molecular Structure, vol. 1108, pp. 347-351, 3/15/ 2016.
  • [22] http://maud.radiographema.eu/. (2017, January 2017).
  • [23] http://profex.doebelin.org/. (2017, January 2017).
  • [24] https://www.ill.eu/sites/fullprof/. (2017, January 2017).
  • [25] A. Pastor and H. G. Svoboda, "Time-evolution of heat affected zone (HAZ) of friction stir welds of AA7075-T651," Journal of Materials Physics and Chemistry, vol. 1, no. 4, pp. 58-64, 2013.
  • [26] R. H. Oskouei, M. R. Barati, and R. N. Ibrahim, "Surface characterizations of fretting fatigue damage in aluminum alloy 7075-T6 clamped joints: the beneficial role of Ni–P coatings," Materials, vol. 9, no. 3, p. 141, 2016.
There are 26 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Journal Section Mechanical Engineering
Authors

Süleyman Kılıç

İlyas Kacar

Mevlut Şahin This is me

Fahrettin Öztürk This is me

Oğuz Erdem This is me

Project Number MMF.A3.17.001
Publication Date January 30, 2020
Submission Date December 6, 2018
Acceptance Date March 6, 2019
Published in Issue Year 2020 Volume: 9 Issue: 1

Cite

APA Kılıç, S., Kacar, İ., Şahin, M., Öztürk, F., et al. (2020). INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 9(1), 528-537. https://doi.org/10.28948/ngumuh.681273
AMA Kılıç S, Kacar İ, Şahin M, Öztürk F, Erdem O. INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075. NOHU J. Eng. Sci. January 2020;9(1):528-537. doi:10.28948/ngumuh.681273
Chicago Kılıç, Süleyman, İlyas Kacar, Mevlut Şahin, Fahrettin Öztürk, and Oğuz Erdem. “INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 9, no. 1 (January 2020): 528-37. https://doi.org/10.28948/ngumuh.681273.
EndNote Kılıç S, Kacar İ, Şahin M, Öztürk F, Erdem O (January 1, 2020) INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 9 1 528–537.
IEEE S. Kılıç, İ. Kacar, M. Şahin, F. Öztürk, and O. Erdem, “INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075”, NOHU J. Eng. Sci., vol. 9, no. 1, pp. 528–537, 2020, doi: 10.28948/ngumuh.681273.
ISNAD Kılıç, Süleyman et al. “INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 9/1 (January 2020), 528-537. https://doi.org/10.28948/ngumuh.681273.
JAMA Kılıç S, Kacar İ, Şahin M, Öztürk F, Erdem O. INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075. NOHU J. Eng. Sci. 2020;9:528–537.
MLA Kılıç, Süleyman et al. “INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, vol. 9, no. 1, 2020, pp. 528-37, doi:10.28948/ngumuh.681273.
Vancouver Kılıç S, Kacar İ, Şahin M, Öztürk F, Erdem O. INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075. NOHU J. Eng. Sci. 2020;9(1):528-37.
 Download Cover Image

23135