In this study, the hemp stem (cannabis) nanofibers have been produced employing the electrospinning method by changing parameters including voltage, and deposition time. The nanosized particles of hemp stems have been mechanically produced by ball milling technique. The powder hemp stem obtained by ball-milling have been prepared in polyacrylonitrile (PAN) polymer with N, N-dimethylformamide (DMF) solution. The optical, morphological and chemical bonding properties of the obtained hemp nanofibers have been analysed employing Ultraviolet-Visible-Near infrared (UV-Vis-NIR) spectroscopy, Scanning Electron Microscopy (SEM) and Fourier Transform Infra-Red (FTIR) spectroscopy, respectively. The diameters of hemp stems nanofibers with PAN polymer have been obtained ranging from 30 to few hundreds of nanometre. Absorbance spectrum of PAN: Hemp stems have been plotted covering from UV to infrared region. Energy band gap value has been calculated as 3.5 eV using Tauc-plotting equations. PAN: Hemp stems has absorbed more photons in UV and visible regions than infrared region. In order to determine the thermal endurance of the produced hemp nanofibers, Thermogravimetric Analysis (TGA) has been carried out for temperatures up to 800 oC. TGA measurements has inferred that both PAN and Hemp stem nanofibers continue losing weight gradually after first sharp decrease at around 300 oC and almost completely disintegrate at 800 oC.
Dicle University Scientific Research Projects Coordinatorship, Selcuk University Scientific Research Coordinatorship
FEN.007
Selcuk University Scientific Research Project (BAP) Coordination for the support projects - Selçuk University, High Technology Research and Application Centre (İL-TEK) and SULTAN Centre for infrastructures. -Dicle University Scientific Research Coordinatorship for supporting this work under project number FEN.20.007.
Bu çalışmada, voltaj, substrat-iğne uzaklığı ve biriktirme süresi gibi parametreler değiştirilerek elektro-eğirme yöntemi kullanılarak kenevir sapı (kenevir) nanolifleri üretilmiştir. Kenevir saplarının nano boyutlu parçacıkları, bilyalı öğütme tekniği ile mekanik olarak üretilmiştir. Bilyalı öğütme ile elde edilen toz kenevir sapı poliakrilonitril (PAN) polimerinde N,N-dimetilformamid (DMF) çözeltisi ile hazırlanmıştır. Elde edilen kenevir nanoliflerinin optik, morfolojik ve kimyasal bağlanma özellikleri sırasıyla Ultraviyole-Görünür-Yakın kızılötesi (UV-Vis-NIR) spektroskopisi, Taramalı Elektron Mikroskobu (SEM) ve Fourier Dönüşümü Kızılötesi (FTIR) spektroskopisi kullanılarak analiz edilmiştir. PAN polimerli kenevir sapı nanoliflerin çapları 30 ila birkaç yüz nanometre arasında değişmektedir. PAN'ın absorpsiyon spektrumu: Kenevir sapları UV'den kızılötesi bölgeye kadar çizildi. Enerji bant aralığı değeri, Tauc-plotting denklemleri kullanılarak 3.5 eV olarak hesaplanmıştır. PAN: Kenevir sapları, UV ve görünür bölgelerde kızılötesi bölgeye göre daha fazla foton emmiştir. Üretilen kenevir nanoliflerinin termal dayanıklılığını belirlemek için 800 oC'ye kadar olan sıcaklıklar için Termogravimetrik Analiz (TGA) yapılmıştır. TGA ölçümleri, hem PAN hem de Kenevir sapı nanoliflerinin 300 oC civarındaki ilk keskin düşüşten sonra kademeli olarak ağırlık kaybetmeye devam ettiğini ve 800 oC'de neredeyse tamamen parçalandığını ortaya çıkardı.
FEN.007
Primary Language | English |
---|---|
Subjects | Engineering |
Journal Section | Articles |
Authors | |
Project Number | FEN.007 |
Early Pub Date | December 29, 2022 |
Publication Date | December 31, 2022 |
Submission Date | March 24, 2022 |
Acceptance Date | May 27, 2022 |
Published in Issue | Year 2022 Volume: 8 Issue: 2 |